So both of us start depart from BM at 4.07pm and reached KL, taman connought met with kl branch tester to take ours dinner before continue to JB.
That night we check in at vistania hotel when reached JB, we thought that it would just take us 2 days to complete the repairing however we are wrong.On Tuesday morning, supervisor tried to find out what’s wrong with the lift. It’s so obvious that the sub contractor from penang that set up the elevator did not work properly. The alignment of the cart was run about 5degree which cause the lift can’t run on track smoothly. Moreover, the glasses got crack because the previous sub contractor force the glasses into the cart but we know that the sizes do not suit the cart. As consequences, we have to carry on the blame from the owner which was not our fault.
So we decide to discuss with sub contractor from JB for the repairing the lift. Since these day we could not do anything, without wasting time we depart to Spg Renggam for check up on next lift.
On Wednesday, at the time we reached there, the owner was so busy with clearing the top of the house since the previous night rained so heavy. Our elevator was affected also because the water flowed into the gap between lift doors. The top of the cart flooded with rain water cause the controller board and door operator board damaged. So these day again we focused on alignment only while waiting for order new parts to reach for replacement.
liquid used in hydraulic
So on Thursday, after obtained the parts, replaced the components, and place a new glass for the lift. So new problem occur where we could not set the speed for open and closing the lift door. We took more than 12hours just on the inverter.
This is how the inverter looks like. it's control the speed of energy needed to open the door, brake the door and use a constant speed to lock the door prevent people from forcefully open with hand.
Final try before depart to melaka,this time sub contrator do all the check up instead of me . So im free to take pictures of them this time.
Friday, after do a final check up, we have to depart to Malaka to repair next elevator. For this lift, it is more easy just need to order new coil for the door switch and replace them. Total 2 part damaged. It’s already, so we have to stay one night with kl tester. So I take this chance to go back to my apartment visit my housemate.
This is how the inverter looks like. it's control the speed of energy needed to open the door, brake the door and use a constant speed to lock the door prevent people from forcefully open with hand.
Final try before depart to melaka,this time sub contrator do all the check up instead of me . So im free to take pictures of them this time.Friday, after do a final check up, we have to depart to Malaka to repair next elevator. For this lift, it is more easy just need to order new coil for the door switch and replace them. Total 2 part damaged. It’s already, so we have to stay one night with kl tester. So I take this chance to go back to my apartment visit my housemate.
Saturday morning, I followed other tester to fix one lift at perking duck restaurant. And next destination is Bangsar where the owner want change a new hydraulic pump. After settle everything only depart back to Penang. So this week took all my turn to learn how to check and repair what is need to repair.
No comments:
Post a Comment